LUXNEON™ SLIM 0612 LED Neon Tube
Slim, Front-Facing, Focused Accent Lighting
SIDE BEND
LUXNEON™ SLIM 0612 LED Neon Tube
LUXNEON™ Slim 0612 LED Neon Flex Tube is a super slim neon tube that bends sideways in a lateral motion. Much slimmer than the average light tube, this light provides hotspot-free, frontfacing directional accent lighting at 90+ CRI. Straightforward, fuss-free installation via plastic mounting clips means less hassle and labor costs. Fully field cuttable with short cutting segments every 1.97″ for last minute on-site modifications.
DOWNLOAD
SPECIFICATION
PHOTOMETRICS
INSTALLATION
APPLICATIONS
DOWNLOAD
SPECIFICATION
MECHANICAL
Parameters
- LED Count 72 LEDs/ft (240 LEDs/m)
- LED Roll Length 16 ft 3/8″ (5m) or built to order
- Tube Dimensions Tube cross-section: 0.47″ (12mm) x 0.24″ (6mm) · Front cap: 0.55″ (14mm) x 1.10″ (28mm) · Closing end cap: 0.55″ (14mm) x 0.51″ (13mm)
- Bending Diameter 1.18″ (30mm)
- Cutting Length 1.97″ (50mm)
Construction & Base Material
- Tube Material Silicone
- Tube Max. Run 16.4ft (5m). Length may be customized for your order
- PCB Material Triple layered polymide film with SMD LEDs
- End Cap Material Silicone
- Diffuser Material Silicone
- Substrate Material Silicone
- Mounting Clip Material Plastic
- Flammability Rated UL94 V-2 flame retardant
Compliance & Regulatory Approval
UL E477011 · cUL E477011 · RoHs · CE · Lead Free · Warranty 5 years
Colors
- Standard White Silicone Tubing Milky white silicone
ELECTRICAL
Parameters
- Wide Beam Angle 113°
- Lamp Life 50,000+ hours
- Standard Color Temperatures 3000K · 4100K · 5300K · 6500K
- Custom Color Temperatures Available Please inquire for more information
- Lumen Output See Photometric Data Table
Dimming
- Pulse-width modulation dimming (PWM)
- 0-10V dimming
- Magnetic low voltage (MLV)
Power Supply
- Input Voltage 24VDC constant voltage
- Input Current 0.15 mA/ft (0.50 mA/m)
- Power Consumption 3.66 W/ft (12 W/m)
- Wire Size 20 AWG 2 Wire
- Please Use Only with Class 2 Power Supply
- Max. No. of Wire Connections 2
- Connector Type Molex® · DC Barrel Jack · Hardwire
PHOTOMETRICS
INSTALLATION
INSTALLATION
- Field Cuttable LUXNEON™ is fully field cuttable every 1.97″ (503mm).
- Field Bendable LUXNEON™ is field bendable and may be flexed or curved for your retail or architectural environment. It is designed for lateral side (left and right) bending only.
- Environment Indoor and outdoor location safe. For wet location installations, please make sure to seal the entry points completely with silicon to prevent water from entering the product.
- IP67 Rated
- Operating Temperature -4˚F ~ +140˚F (-20˚C ~ +60˚C)
- Heat Sink Not required for installation.
- Mounting May be mounted with plastic mounting clips.
- Connecting Multiple Tubes LUXNEON™ may be purchased custom cut to your desired length or ordered in 5m reels and field cut to size.
SAFETY
- Electric Code Compliance Please make sure to install LUXNEON™ in accordance with standard national and local electrical codes.
- Class 2 Compliance When cutting your LUXNEON™ tube, keep in mind that Class 2 compliance restricts the max load of the product to 96W.
APPLICATIONS
APPLICATIONS
- Outdoor/Indoor Decorative Lighting
- Cove Lighting
- Awning Lighting
- Wall Wash Lighting
- Architectural Lighting
- Curved Embedded Lighting
- Decorative Linear Lighting
- Channel Letters
- Signage
- Border Tubing
- Accent Lighting
- Compact, Space-Sensitive Applications
- Retail Applications
Product Features
Bend & Flex Sideways
UV Safe
Slim
Easy to Install
Wide Beam Angle – 120°
Plug & Play
V-2 Flame Retardant (UL94)
Long LED Lifespan – LM-80
Field Cuttable for Custom Lengths
IP67 Dust & Temporary Immersion safe
Hotspot-Free Neon-Like Illumination
Certifications
