714.256.2111
LUXNEON™ "S" FLEX TUBE LIGHTS
CURVABLE NEON-LIKE ILLUMINATION
Say goodbye to yesterday’s old school neon lighting technologies and say hello to LUXNEON™ LED Flexible Neon Tube Lighting, designed for today’s modern architectural and signage applications. Although LUXNEON™ provides a visual effect similar to traditional neon, it is so much safer and easier to install. With LUXNEON™ you can bend, flex, cut, and contour these beautiful tubes for your desired architectural application. Simply plug it in and watch the lighting magic happen right before your eyes. Available in a myriad of colors for cove and embedded architectural lighting applications.
Create a modern, continuous line of light or add a touch of neon nostalgia with LUXNEON™!
SYSTEM OVERVIEW
Single Power Supply
Dual Power Supply
AVAILABLE COLORS
 |  |  |  |
| WARM WHITE 3000K | NEUTRAL WHITE 4100K | DAYLIGHT 5300K | COOL WHITE 6500K |
 |  |  |  |
| RED | YELLOW | GREEN | BLUE |
Product Features
- Bend & Flex
- Outstanding Brightness
- Wide Beam Angle
- IP67 Dust & Temporary Immersion safe
- Custom Lengths
- V-2 Flame Retardant (UL94)
- Cuttable
- Authentic Silicone Body
- UV Safe
- Custom Color Temps
- Plug & Play
- Dot-Free Neon-Like Illumination
Ceritifications
CUL Listed E477011
100% QC
Limited Warranty
SPECIFICATION
PHOTOMETRICS
INSTALLATION
ACCESSORIES
APPLICATIONS
DOWNLOADS
SPECIFICATION
MECHANICAL
Parameters
- LED Count 33 pc/ft (112 pc/m)
- LED Roll Length 13 ft 1-7/16″ (4m) or built to order
- Tube Dimensions Tube cross-section: 0.96″ (24.4mm) x 0.47″ (11.9mm) · Tube w/end cap: 1.05″ (26.6mm) x 0.56″ (14.1mm)
- Flat Bend 1″ (25 mm)
- Cutting Length 2″ (51 mm)
Construction & Base Material
- Tube Material Silicone
- Tube Max. Run Length may be customized for your order
- PCB Material Flexible PVC with SMD LEDs
- End Cap Material Silicone
- Diffuser Material Silicone
- Substrate Material Silicone
- Mounting Clip Material Aluminum
- Mounting Channel Material Aluminum
- Flammability Rated UL94 V-2 flame retardant
Compliance & Regulatory Approval
UL E477011 · cUL E477011 · RoHs · CE · Lead Free · Warranty 5 years
Colors
- Diffuser Milky white silicone
- Standard White Silicone Tubing Stardust gray (white color temperatures only)
- Colored Silicone Tubing (For single colored lights only.) · Red · Yellow · Green · Blue · Tubing color matches LED light color.
ELECTRICAL
Parameters
- Wide Beam Angle 150°
- Lamp Life 60,000+ hours
- Standard Color Temperatures 3000K · 4100K · 5300K · 6500K
- Standard Single Color Temperatures Red (625nm) · Yellow (588nm) · Green (525nm) · Blue (465nm)
- Custom Color Temperatures Available Please inquire for more information
- Lumen Output See Photometric Data Table
Dimming
- Pulse-width modulation dimming (PWM)
- 0-10V dimming
- Magnetic low voltage (MLV)
Power Supply
- Input Voltage 24VDC constant voltage
- Input Current 120mA/ft (396mA/m)
- Power Consumption White color temperatures 2.92 W/ft (9.6 W/m) · Single color 2.37 W/ft (7.8 W/m)
- Wire Size 20 AWG 2 Wire
- Please Use Only with Class 2 Power Supply
- Max. No. of Wire Connections 2
- Connector Type Molex® · DC Barrel Jack · Hardwire
Max. Load & Max Length
| MAX LOAD 96 W | |
|---|---|
| # of Power Supplies | Max. Tube Length |
| 1 | 32.8ft (10m) |
| 2 | 65.6ft (20m) |
PHOTOMETRICS
| COLOR TEMP. (CCT) | LUMEN EFFICACY | BEAM ANGLE | LUMINOUS FLUX | POWER | |
|---|---|---|---|---|---|
 | 3000K Warm White | 74.2 lm/W | 150° | 216.6 lm/ft (710.6 lm/m) | 2.92 W/ft 9.6 W/m |
 | 4100K Neutral White | 74.2 lm/W | 150° | 216.6 lm/ft (710.6 lm/m) | 2.92 W/ft 9.6 W/m |
 | 5300K Daylight | 74.2 lm/W | 150° | 216.6 lm/ft (710.6 lm/m) | 2.92 W/ft 9.6 W/m |
 | 6500K Cool White | 74.2 lm/W | 150° | 216.6 lm/ft (710.6 lm/m) | 2.92 W/ft 9.6 W/m |
| COLOR TEMPERATURE (CCT) | LUMEN EFFICACY | BEAM ANGLE | LUMINOUS FLUX | POWER | |
|---|---|---|---|---|---|
 | Red 625nm | 44.5 lm/W | 150° | 104.2 lm/ft (341.8 lm/m) | 2.37 W/ft (7.8 W/m) |
 | Yellow 588nm | 47.1 lm/W | 150° | 110.5 lm/ft (362.3 lm/m) | 2.37 W/ft (7.8 W/m) |
 | Green 525nm | 34 lm/W | 150° | 80 lm/ft (262.4 lm/m) | 2.37 W/ft (7.8 W/m) |
 | Blue 465nm | 15 lm/W | 150° | 35.1 lm/ft (115.2 lm/m) | 2.37 W/ft (7.8 W/m) |
INSTALLATION
INSTALLATION
- Field Cuttable LUXNEON™ is fully field cuttable every 2″ (51mm).
- Field Bendable LUXNEON™ is field bendable and may be flexed or curved for your retail or architectural environment. It is designed for lateral (left to right) bending only.
- Environment Indoor and outdoor location safe. For wet location installations, please make sure to seal the entry points completely with silicon to prevent water from entering the product.
- IP67 Waterproof
- Operating Temperature -13˚F ~ +140˚F (-25˚C ~ +60˚C)
- Heat Sink Not required for installation.
- Mounting May be mounted with mounting clips or with a mounting channel.
- Connecting Multiple Tubes LUXNEON™ may be purchased custom cut to your desired length or cut into smaller segments and connected with an interconnection connector to chain the tubes together.
SAFETY
- Electric Code Compliance Please make sure to install LUXNEON™ in accordance with standard national and local electrical codes.
- Class 2 Compliance When cutting your LUXNEON™ tube, keep in mind that Class 2 compliance restricts the max load of the product to 96W.
We offer a lighting solution designed for convex bending similar to the LUXNEON™ Lateral “S” Flex. If interested, please reach out to one of our sales representatives for more information.
ACCESSORIES
1
4
7
2
5
8
3
6
9
| # PART NUMBER | COMPONENT | MATERIAL | PURPOSE |
| 1. N24-PC | Power Supply Connector Set | Polyproylene | To help connect power supplies to the product. |
| 2. N24-ICS | Interconnection Connector Set | Polyproylene | To connect multiple LUXNEON LED tubes together. |
| 3. N24-EC | Silicone End Cap | Silicone | Protects the open wiring of the LED strip within the tube. |
| 4. N24-AL | Aluminum Installation Channel - 3.28 ft (1m) | Anodized aluminum | Prevents tubes from moving freely for embedded mounting applications. |
| 5. N24-AS | Aluminum Installation Channel - 1.4" (3.5cm) | Anodized aluminum | Smaller installation profile for applications where product needs to be visibly seen. |
| 6. N24-G | Silicone Glue - 1.52 ft. oz (45ml) | N/A | Used to glue end caps, mounting clips and additional installation components to install the product. |
| 7. N24-ACL | Aluminum Installation Channel with Embedded Clip - 3.28 ft (1m) | Anodized aluminum | Aids in the installation of longer LUXNEON LED tubes. Embedded clips prevent tubes from moving freely. |
| 8. N24-ACS | Aluminum Installation Channel - 1.4" (3.5cm) | Anodized aluminum | Allows for surface mounting of product with screws. |
| 9. N24-MC | Mounting Clip | Polyproylene | Allows for mounting the product. |
APPLICATIONS
APPLICATIONS
- Outdoor/Indoor Decorative Lighting
- Cove Lighting
- Awning Lighting
- Wall Wash Lighting
- Architectural Lighting
- Curved Embedded Lighting
- Decorative Linear Lighting
- Channel Letters
- Signage
- Border Tubing
- Accent Lighting
- Compact, Space-Sensitive Applications
- Retail Applications
No portfolio items were found.
