LUXLINEAR™ 2019 Round

Home PRODUCTS LUXLINEAR™ LED TUBE LIGHTING LUXLINEAR™ 2019 Round

LUXLINEAR™ 2019 ROUND

Indoor/Dry Location Series

BROAD ILLUMINATION

Despite its slim design, our LUXLINEAR™ Round Profile 2019 LED light tubes are capable of providing the broadest angle of light in contrast to its sister profile extrusions. Featuring the slim, sleek look found throughout the LUXLINEAR™ product line, the round profile’s distinct advantage is its round lens, which allows for a seamless beam of light that provides broader focused lighting. Like all LUXLINEAR™ products, this profile is also compatible with many LUXLINE™ LED Light Strips.

Product Features

Powered by LUXLINE LED Strip
Slim Width
Customer Length
Protects against dust & debris
Comes with 2 mounting clips
Ships Fully Assembled

Certifications

CUL Listed

100% QC

Limited Warranty

SPECIFICATION

APPLICATIONS

DIMENSIONS

COMPATIBILITY

DOWNLOADS

SPECIFICATION

MECHANICAL

Construction & Base Material

Extrusion Max. Run 6.5ft (2m) per individual extrusion. For applications longer than 6.5 ft, multiple individual extrusions can be mounted side by side without affecting lighting.
Extrusion Material Anodized aluminum
Mounting Clip Material Steel
End Cap Material Polypropylene
Diffuser Lens Material Polypropylene

Compliance & Regulatory Approval

UL E477011 · RoHs · CE · Warranty 5 years

Tube Options

Diffuser Lens Frosted · Clear · No lens

Finishes

Aluminum Finish Clear anodized aluminum
Available Powdercoat Finish Gloss · Matte · Textured · Metallic
Available Colors

ELECTRICAL

Max. Load & Max LED Strip Width

Max. Load Depends on the type of LUXLINE™ or equivalent LED strip is used to power the LUXLINEAR™ LED Tube extrusion. Please reach out to a Sales Team Member for more information about Max Load & Power Capacity for our various LUXLINE™ LED Strips.
Max. LED Strip Width This profile will only accommodate strips up to and less than 0.48” (12.2mm) wide.

SAFETY

Electric Code Compliance Please make sure to install LUXLINEAR in accordance with standard national and local electrical codes.
Outdoor Usage LUXLINEAR is meant to be used for indoor dry locations applications only.

APPLICATIONS

ILLUMINATION TYPE
Backlighting	Yes
Under Cabinet Lighting	Yes
Retail & POP display	Yes
Showcase Lighting	Yes
Display lighting	Yes

ADJUSTABILITY & COMPATIBILITY
Adjustable after mounting	No
Smart Track System compatible	No
Direct end-to-end connectable	No
IC Chip compatible	No

DIOR Retail Store

Too Faced POP Display

MOUNTING
Surface	Yes
45 Degrees	Yes
Recessed - for mitered groove	Yes
Outdoor	No
Flangeless	Yes
Flange	Yes

MOUNTING CLIP TYPE

W/ Mounting Clip Magnet

INSTALLATION

Field Cuttable LUXLINEAR™ is fully field cuttable and may be cut at any point along the extrusion.
Environment Indoor/dry location only. For best performance, avoid mounting assembled extrusions in direct sunlight. Avoid mounting LUXLINEAR™ near direct water contact or surfaces subject to puddling caused by rainfall or sprinkler sprays.
Indoor Damp Location Safe Only with appropriate IP rating and proper damp location treatment to the LUXLINE™ LED strip contained within the assembled extrusion.
Mounting Extrusion may be mounted with 3M adhesives or by drilling with provided mounting clips.

DIMENSIONS

ISO VIEW

TOP VIEW

# Component	Dimensions	Materials	Color	Description
1. Channel Width	0.64” 16.2mm	Anodized aluminum	Moon Gray	Refers to the interior space within the extrusion. LUXLINE LED strips must be no larger than the channel width to fit inside LUXLINEAR tubes.
2. Aluminum Extrusion	0.77” X 0.42” 19.5mm X 10.7mm	Anodized aluminum	Moon Gray	Encases LUXLINE LED strips in a sleek container which keeps dust, debris, water and moisture away from the strip . Also acts as a heat sink to prolong the lifespan of the LUXLINEAR LED strip tape contained within.
3. Channel Cross-Section & Mounting Clips	0.87” X 0.79” 22mm X 20mm	Anodized aluminum	Moon Gray	Provides the absolute maximum width of the installed aluminum extrusion snapped into the mounting clip.
4. Diffuser lens	0.75” X 0.45” 19mm X 11.5mm	Polyproylene	Frosted	Protects LUXLINE LED strip lights contained within LUXLINEAR tubes from dust, debris & moisture. Softens the light beam intensity. Protects LUXLINE LED strip lights contained within LUXLINEAR tubes from dust, debris & moisture. Softens the light beam intensity. Diffuser may marginally shift Kelvin temperature and decrease lumen output.
4. Diffuser lens	0.75” X 0.45” 19mm X 11.5mm	Polyproylene	Clear	Protects LUXLINE™ LED strip lights contained within LUXLINEAR™ tubes from dust, debris & moisture without affecting color temperature
5. Mounting Clips	0.87” X 0.55” X 0.51” 22mm X 14mm X 13mm	Steel	Moon Gray	To install, clips may be screwed into a surface with a flat screw. LUXLINEAR may be inserted into the installed clip for mounting. 2 clips are provided for every tube < 48" length.
6. End Caps	0.77” X 0.77” X 0.31” 19.6mm X 19.5mm X 8mm	Polyproylene	Crater Gray	End caps are provided in pairs and come with one closed end and one open cap that allows for wires up 18 AWG to pass through.

COMPATIBILITY

Customize Your Fit

LUXLINE™ LED Strips are compatible with many LUXLINEAR™ LED Tube profile extrusions. Take a look below to see which strips fit this particular strip profile.

Strip Type	Width
LUXLINE 2835L LUXLINE 2835H	0.16" (4mm)
LUXLINE 2016 LUXLINE 3528H	0.20" (5mm)
LUXLINE 3528 (RGB)	0.24" (6mm)
LUXLINE 2835R LUXLINE 2835R0 LUXLINE 3528 (Tunable White)	0.31" (8mm)