LUXLINEAR™ 1707 LOW

Home PRODUCTS LUXLINEAR™ LED TUBE LIGHTING LUXLINEAR™ 1707 LOW

LUXLINEAR™ LOW 1707

Indoor/Dry Location Series

SLEEK ILLUMINATION

Our LUXLINEAR™ Low Profile 1707 LED light tubes are specially designed to fit into and illuminate slimmer, compact fixtures and applications. The profile’s shorter height provides a way to hide the light fixture inside or under a fixture’s lip for a sleeker look. Put your light fixture on display, or conceal it so that your design looks seamless – the choice is yours. Like all LUXLINEAR™ products, this profile is compatible with many LUXLINE™ LED Light Strips.

Product Features

Powered by LUXLINE LED Strip
Protects against dust & debris
Ships Fully Assembled
Comes with 2 mounting clips
Custom Length
Slim Width

Certifications

CUL Listed

100% QC

Limited Warranty

Looking For Specs & More?

Specification Sheet/Cut Sheet
IES File
Installation Guide
Application Note
Others

Download Now

SPECIFICATION

LUMEN DATA

APPLICATIONS

DIMENSIONS

COMPATIBILITY

DOWNLOADS

SPECIFICATION

MECHANICAL

Construction & Base Material

Extrusion Max. Run 6.5ft (2m) per individual extrusion. For applications longer than 6.5 ft, multiple individual extrusions can be mounted side by side without affecting lighting performance.
Extrusion Material Anodized aluminum
Mounting Clip Material Steel
End Cap Material Polypropylene
Diffuser Lens Material Polypropylene

Compliance & Regulatory Approval

UL E477011 · RoHs · CE · Warranty 5 years

Tube Options

Diffuser Lens Frosted · Clear · No lens

Finishes

Aluminum Finish Clear anodized aluminum
Available Powdercoat Finish Gloss · Matte · Textured · Metallic
Available Colors

ELECTRICAL

Max. Load & Max Led Strip Width

Max. Load Dependent on the type of LUXLINE™ or equivalent LED strip used to power the LUXLINEAR™ LED Tube extrusion. See LUXLINE™ or relevant LED strip specification for more details.
Max. LED Strip Width This profile will only accommodate strips up to and less than 0.48” (12.2mm) wide.

SAFETY

Electric Code Compliance Please make sure to install LUXLINEAR™ in accordance with standard national and local electrical codes.
Outdoor Usage LUXLINEAR™ is meant to be used for indoor dry locations applications only.

LUMEN DATA

COMPATIBLE LUXLINE STRIP		FROSTED LENS		CLEAR LENS		NO LENS
SIZE	WIDTH	BEAM ANGLE	LUMEN OUTPUT	BEAM ANGLE	LUMEN OUTPUT	BEAM ANGLE	LUMEN OUTPUT
LUXLINE 2835L*	0.16” 4mm	150°	129 lm	154°	207 lm	154°	259 lm
LUXLINE 2835H*	0.16” 4mm	150°	181 lm	154°	290 lm	154°	362 lm
LUXLINE 2016	0.20” 5mm	150°	129 lm	154°	207 lm	154°	259 lm
LUXLINE 3528H	0.20” 5mm	150°	104 lm	154°	166 lm	154°	207 lm
LUXLINE 3528 - RGB	0.24” 6mm	150°	78 lm	154°	124 lm	154°	155 lm
LUXLINE 2835R	0.31” 8mm	150°	129 lm	154°	207 lm	154°	259 lm
LUXLINE 2835R0	0.31” 8mm	150°	91 lm	154°	146 lm	154°	182 lm
LUXLINE 3528 - Tunable White	0.31” 8mm	150°	129 lm	154°	207 lm	154°	259 lm

APPLICATIONS

LUXLINEAR APPLICATION TYPES

ILLUMINATION TYPE
Under Cabinet Lighting	Yes
Retail & POP display	Yes
Showcase Lighting	Yes
Display lighting	Yes

ADJUSTABILITY & COMPATIBILITY
Adjustable after mounting	No
Smart Track System compatible	No
Direct end-to-end connectable	No
IC Chip compatible	No

DIOR Retail Store

Too Faced POP Display

MOUNTING
Surface	Yes
45 Degrees	Yes
Recessed - for mitered groove	Yes
Outdoor	No
Flangeless	Yes
Flange	Yes

MOUNTING CLIP TYPE

W/ Mounting Clip Magnet

INSTALLATION

Field Cuttable LUXLINEAR™ is fully field cuttable and may be cut at any point along the extrusion.
Environment Indoor/dry location only.
Indoor Damp Location Safe Only with appropriate IP rating and proper damp location treatment to the LUXLINE™ LED strip contained within the assembled extrusion.
Mounting Extrusion may be mounted with 3M adhesives or by drilling with provided mounting clips.

DIMENSIONS

ISO VIEW

TOP VIEW

# Component	Dimensions	Materials	Color	Description
1. Channel Width	0.48” (12.2mm)	Anodized aluminum	Moon Gray	Refers to the interior space within the extrusion. LUXLINE LED strips must be no larger than the channel width to fit inside LUXLINEAR tubes.
2. Aluminum Extrusion	0.69” X 0.28” (17.5mm X 7mm)	Anodized aluminum	Moon Gray	Encases LUXLINE LED strips in a sleek container which keeps dust, debris, water and moisture away from the strip . Also acts as a heat sink to prolong the lifespan of the LUXLINEAR LED strip tape contained within.
3. Channel Cross-Section & Mounting Clips	0.75” X 0.34” (19mm X 8.6mm)	Anodized aluminum	Moon Gray	Provides the absolute maximum width of the installed aluminum extrusion snapped into the mounting clip.
4. Diffuser lens	0.56” X 0.2” (14.2mm X 5.3mm)	Polyproylene	Frosted	Helps protect LUXLINE LED strip lights contained within LUXLINEAR tubes from dust, debris & moisture. Softens the light beam intensity. Diffuser may marginally shift Kelvin temperature and decrease lumen output.
4. Diffuser lens	0.56” X 0.2” (14.2mm X 5.3mm)	Polyproylene	Clear	Helps protect LUXLINE™ LED strip lights contained within LUXLINEAR™ tubes from dust, debris & moisture without affecting color temperature
5. Mounting Clips	0.75” X 0.47” X 0.34” (19mm X 12mm X 8.7mm)	Steel	Moon Gray	To install, clips may be screwed into a surface with a flat screw. LUXLINEAR may be inserted into the installed clip for mounting. 2 clips are provided for every tube < 48" length. For every additional 48", 2 extra clips will be provided. Please ask a Sales Rep if more clips are needed.
6. End Caps	0.69” X 0.45” X 0.30” (17.5mm X 11.4mm X 7.6mm)	Polyproylene	Crater Gray	End caps are provided in pairs and come with one closed end and one open cap that allows for wires up 18 AWG to pass through.

COMPATIBILITY

Customize Your Fit

LUXLINE™ LED Strips are compatible with many LUXLINEAR™ LED Tube profile extrusions. Take a look below to see which strips fit this particular profile.

Strip Type	Width
LUXLINE 2835L* LUXLINE 2835H*	0.16" (4mm)
LUXLINE 2016 LUXLINE 3528H	0.20" (5mm)
LUXLINE 3528 (RGB)	0.24" (6mm)
LUXLINE 2835R LUXLINE 2835R0 LUXLINE 3528 (TUNABLE WHITE)	0.31" (8mm)
*Available upon request